Ninotnc config: Difference between revisions

From TARPN Wiki
No edit summary
No edit summary
Line 1: Line 1:
== NinoTNC DIP switch settings ==
== NinoTNC DIP switch settings ==


These settings apply to the most recent version of NinoTNC (a4). To see older settings, refer to the [http://tarpn.net/t/nino-tnc/n9600a/n9600a_operation.html full operator's manual].
These settings apply to the most recent version of NinoTNC (A4). To see older settings, refer to the [http://tarpn.net/t/nino-tnc/n9600a/n9600a_operation.html full operator's manual].
 
There are two sets of DIP switches on the NinoTNC. Those on the top edge control how to communicate with the model of radio you have attached it to, and those along the bottom edge control the baud rate and mode.
 
Top DIP switches:
 
 
Bottom DIP switches:
{| class="wikitable"
|+
!Setting
!Effect
|-
|0-0-0-0
|9600 baud AX.25
|-
|0-0-0-1
|9600 baud IL2P
|-
|0-0-1-0
|4800 baud AX.25
|-
|0-0-1-1
|4800 baud IL2P
|-
|0-1-0-0
|2400 baud AX.25
|-
|0-1-0-1
|2400 baud IL2P
|-
|0-1-1-0
|1200 baud AX.25
|-
|0-1-1-1
|1200 baud IL2P
|-
|1-1-0-0
|300 baud AX.25
|-
|1-1-0-1
|300 baud IL2P
|-
|1-1-1-0
|150 baud AX.25
|-
|1-1-1-1
|150 baud IL2P
|}

Revision as of 13:48, 26 April 2023

NinoTNC DIP switch settings

These settings apply to the most recent version of NinoTNC (A4). To see older settings, refer to the full operator's manual.

There are two sets of DIP switches on the NinoTNC. Those on the top edge control how to communicate with the model of radio you have attached it to, and those along the bottom edge control the baud rate and mode.

Top DIP switches:


Bottom DIP switches:

Setting Effect
0-0-0-0 9600 baud AX.25
0-0-0-1 9600 baud IL2P
0-0-1-0 4800 baud AX.25
0-0-1-1 4800 baud IL2P
0-1-0-0 2400 baud AX.25
0-1-0-1 2400 baud IL2P
0-1-1-0 1200 baud AX.25
0-1-1-1 1200 baud IL2P
1-1-0-0 300 baud AX.25
1-1-0-1 300 baud IL2P
1-1-1-0 150 baud AX.25
1-1-1-1 150 baud IL2P